Renault Laguna III Manual page 652

TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
M4R
III - FINAL OPERATION
a Refit:
- the injector rail (see 13B, Diesel injection, Injec-
tor rail: Removal - Refitting, page 13B-189) ,
- the timing sprockets (see Timing sprocket: Re-
moval - Refitting) ,
- the rocker cover (see 11A, Top and front of en-
gine, Rocker cover: Removal - Refitting, page
11A-139) ,
- the ignition coils (see 17A, Ignition, Coils: Re-
moval - Refitting, page 17A-1) ,
- the inlet distributor (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-75) ,
- the throttle valve (see 12A, Fuel mixture, Throttle
valve: Removal - Refitting, page 12A-49) ,
- the timing chain (see 11A, Top and front of en-
gine, Timing chain: Removal - Refitting, page
11A-88) ,
- the crankshaft seal on the timing side (see 10A,
Engine and cylinder block assembly, Crank-
shaft seal on timing end: Removal - Refitting,
page 10A-134) .
a Immobilise the flywheel or the drive plate using the
tool (Mot. 919-02).
a Refit the crankshaft accessories pulley (see 11A,
Top and front of engine, Crankshaft accessories
pulley: Removal - Refitting, page 11A-33) .
a Remove the tool (Mot. 919-02).
a Refit the accessories belt (see 11A, Top and front
of engine, Accessories belt: Removal - Refitting,
page 11A-13) .
a Remove the engine from the component support
(see Engine support equipment: Use) .
M4R, and 704
a Connect the manual gearbox to the engine (see
Manual gearbox: Removal - Refitting) (21A, Man-
ual gearbox).
a Refit the « engine and gearbox » assembly (see
10A, Engine and cylinder block assembly, En-
gine - gearbox assembly: Removal - Refitting,
page 10A-1) .
a Top up the engine oil (see 10A, Engine and cylin-
der block assembly, Engine oil: Draining - Refill-
ing, page 10A-100) .
11A-274
11A