Renault Laguna III Manual page 349

ENGINE AND CYLINDER BLOCK ASSEMBLY
Multifunction support: Removal - Refitting
K9K
a Tighten the multifunction support bolts in order.
II - FINAL OPERATION.
a Refit:
- the compressor (see Compressor: Removal - Re-
fitting) (MR 415, 62A, Air conditioning),
- the alternator (see 16A, Starting - Charging, Al-
ternator: Removal - Refitting, page 16A-1) ,
- the front end panel (see Front end panel: Remov-
al - Refitting) (MR 416, 42A, Upper front struc-
ture),
- the headlights (see Headlight: Removal - Refit-
ting) (MR 415, 80B, Headlights),
- the front bumper (see Front bumper: Removal -
Refitting) (MR 416, 55A, Exterior protection),
- the engine undertray,
- the engine undertray bolts,
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 416,
55A, Exterior protection),
- the front right-hand wheel (see Wheel: Removal -
Refitting) (MR 415, 35A, Wheels and tyres).
a Fill the refrigerant circuit (see Refrigerant circuit:
Draining - Filling) (MR 415, 62A, Air conditioning).
a Refit the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (MR 415, 80A, Battery).
a Adjust the headlights (see Headlight: Adjustment)
(MR 415, 80B, Headlights).
123832
10A-272
10A