Intercooler: Removal - Refitting - Renault Laguna III Manual

Intercooler: Removal - Refitting
F4R
Equipment required
safety strap(s)
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray,
- the front wheels (see Wheel: Removal - Refitting)
(MR 415, 35A, Wheels and tyres),
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (MR 416, 55A, Exterior
protection),
- the front bumper (see Front bumper: Removal -
Refitting) (MR 416, 55A, Exterior protection).
a Fit a safety strap(s) to the « engine cooling fan -
condenser - cooling radiator » assembly.
a Remove:
- the power-assisted steering fluid pipe bolts (1) ,
TURBOCHARGING
124572
12B-59
- the radiator mounting cross member (see Radiator
mounting cross member: Removal - Refitting)
(MR 416, 41A, Front lower structure).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Pull out the intercooler air inlet pipe clip (2) .
a Disconnect the intercooler air inlet pipe.
a Pull out the intercooler air outlet pipe clip (3) .
a Disconnect the intercooler outlet air pipe.
12B
123738
123739