Camshaft: Removal - Refitting - Renault Laguna III Manual

TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
F4R
Tightening torquesm
engine tie-bar bolt on
the engine tie-bar
mounting
engine tie-bar bolt on
the subframe
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Remove:
- the engine cover,
- the front right-hand wheel (see Wheel: Removal -
Refitting) (MR 415, 35A, Wheels and tyres),
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 416,
55A, Exterior protection),
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the engine undertray bolts,
- the engine undertray,
- the crankshaft accessories pulley (see 11A, Top
and front of engine, Crankshaft accessories
pulley: Removal - Refitting, page 11A-33) .
190 Nm
115 Nm
a Remove:
- the engine tie-bar bolt (1) on the subframe,
- the bolt (2) from the engine tie-bar on the engine
tie-bar mounting,
- the lower linkage,
- the right-hand suspended engine mounting (see
19D, Engine mounting, Right-hand suspended
engine mounting: Removal - Refitting, page
19D-51) ,
- the timing belt (see 11A, Top and front of engine,
Timing belt: Removal - Refitting, page 11A-50) ,
- the camshaft seals on the timing end (see 11A,
Top and front of engine, Camshaft seal, timing
end: Removal - Refitting, page 11A-287) ,
- the rocker cover (see 11A, Top and front of en-
gine, Rocker cover: Removal - Refitting, page
11A-139) .
11A-245
11A
123177