Renault Laguna III Manual page 149

ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine - gearbox assembly: Removal - Refitting
K4M
a Refit:
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- differential output seals (see Differential output
seal: Removal - Refitting) ,
- the front left-hand driveshaft (see Front left-hand
driveshaft: Removal - Refitting) (29A, Drive-
shafts),
- the front right-hand driveshaft (see Front right-
hand driveshaft: Removal - Refitting) (29A,
Driveshafts),
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion),
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the air outlet pipe to the air filter box,
- the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) .
a Connect the air filter box air outlet pipe to the throttle
valve.
a Refit:
- the battery (see Battery: Removal - Refitting)
(80A, Battery)
- the engine cover.
a Refill:
- the cooling circuit (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-16) ,
- the engine if necessary (see 10A, Engine and cyl-
inder block assembly, Engine oil: Draining - Re-
filling, page 10A-100) ,
- the refrigerant circuit using the refrigerant charg-
ing station (see Refrigerant circuit: Draining -
Filling) (62A, Air conditioning),
- the gearbox (see Manual gearbox oils: Draining -
Filling) (21A, Manual gearbox).
a Refit the engine undertray.
10A-72
10A