Renault Laguna III Manual page 318

ENGINE AND CYLINDER BLOCK ASSEMBLY
Oil level sensor: Removal - Refitting
K4M
Tightening torquesm
oil level sensor
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector (1) from the oil level sen-
sor.
25 N.m
128366
a Remove the oil level sensor using a "Crowfoot" type
end piece (2) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
a Refit the oil level sensor.
a Tighten to torque the oil level sensor (25 N.m).
a Connect the connector to the oil level sensor.
10A-241
10A
123464
128368