Renault Laguna III Manual page 241

ENGINE AND CYLINDER BLOCK ASSEMBLY
Crankshaft seal, gearbox end: Removal - Refitting
F4R
- the front wheels (see Wheel: Removal - Refitting)
(MR 415, 35A, Wheels and tyres),
- the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the battery tray (see Battery tray: Removal - Re-
fitting) (MR 415, 80A, Battery),
- the battery (see Battery: Removal - Refitting)
(MR 415, 80A, Battery),
- the engine undertray,
- the engine undertray bolts.
a Tighten the engine undertray bolts.
a Perform the following operations:
- fill the cooling system (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-16) ,
- bleed the cooling circuit (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-16) ,
- fill the refrigerant circuit using a refrigerant charg-
ing station (see Refrigerant circuit: Draining -
Filling) (MR 415, 62A, Air conditioning).
a Refit the engine cover.
10A-164
10A