Crankshaft Accessories Pulley: Removal - Refitting - Renault Laguna III Manual

TOP AND FRONT OF ENGINE
Crankshaft accessories pulley: Removal - Refitting
F4R
Tightening torquesm
crankshaft accessories
pulley bolt
IMPORTANT
Wear protective gloves during the operation.
WARNING
Do not run the engine without the accessories belt
to avoid damaging the crankshaft accessories pul-
ley.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Remove:
- the engine cover,
- the front right-hand wheel (see Wheel: Removal -
Refitting) (MR 415, 35A, Wheels and tyres),
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 416,
55, Exterior protection),
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the engine undertray bolts,
- the engine undertray.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
40 Nm + 110˚ ± ± ± ±
10˚
a Lock the engine flywheel using a screwdriver at (1) .
a Remove:
11A-33
- the crankshaft accessories pulley bolt (2) ,
- the crankshaft accessories pulley.
11A
123719
124135