Renault Laguna III Manual page 316

ENGINE AND CYLINDER BLOCK ASSEMBLY
Oil level sensor: Removal - Refitting
F4R
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Remove:
- the engine undertray bolts,
- the engine undertray.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector (1) for the oil level sensor
from below.
a Remove the oil level sensor (2) from below.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the oil level sensor.
a Tighten the oil level sensor.
a Connect the connector to the oil level sensor.
II - FINAL OPERATION.
a Refit:
123139
- the engine undertray,
- the engine undertray bolts.
a Tighten the engine undertray bolts.
10A-239
10A
123140