Renault Laguna III Manual page 445

TOP AND FRONT OF ENGINE
Timing belt: Removal - Refitting
K9K
a Fit a new timing belt starting with the crankshaft
sprocket.
a Align the timing belt marks with the marks:
- of the crankshaft timing sprocket,
- of the camshaft pulley,
- of the high pressure pump pulley.
Note:
There should be 19 belt tooth grooves between
the marks on the camshaft pulley and the high
pressure pump pulley and 51 belt tooth grooves
between the marks on the crankshaft timing
sprocket and the high pressure pump pulley.
a Bring the timing belt tensioning roller adjustable in-
dex (25) opposite the lug (26) using a 6 mm Allen
key, turning it anti-clockwise.
a Tighten the timing belt tensioning roller bolt.
11A-67
11A
109044
19658