Renault Laguna III Manual page 671

TOP AND FRONT OF ENGINE
Camshaft seal, timing end: Removal - Refitting
K9K
II - REFITTING OPERATION FOR PART
CONCERNED
a Screw the stud (12) of the (Mot. 1632) onto the cam-
shaft.
a Fit a new camshaft seal on the camshaft at the tim-
ing end.
Note:
For camshaft seals delivered fitted to a protective
sleeve:
- do not remove the camshaft seal from its pro-
tective sleeve,
- fit the sleeve fitted with the camshaft seal on the
camshaft,
- push the protective sleeve towards the cylinder
head until the camshaft seal reaches its limit on
the cylinder head,
- fit the seal on the camshaft by following the rec-
105531 ommendations below.
1 - First fitting of the camshaft seal
21687
a Fit the cover (13) and the collar nut (14) of the (Mot.
1632).
11A-293
11A
21687-2