Renault Laguna III Manual page 312

ENGINE AND CYLINDER BLOCK ASSEMBLY
Oil pressure sensor: Removal - Refitting
V4Y
a Refit a new plastic clip to the oil pressure sensor
connector.
Note:
Ensure that the wiring of the oil pressure sensor
connector passes underneath the connector and
does not come into contact with the driveshaft.
II - FINAL OPERATION
a Refit:
- the lower engine tie-bar (see 19D, Engine mount-
ing, Lower engine tie-bar: Removal - Refitting,
page 19D-85) ,
- the front right-hand driveshaft (see Front right-
hand driveshaft: Removal - Refitting) (29A,
Driveshafts)
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the engine undertray.
a Top up the engine oil (see 10A, Engine and cylin-
der block assembly, Engine oil: Draining - Refill-
ing, page 10A-100) .
a Refit:
- the engine oil filler cap,
- the dipstick.
10A-235
10A