Renault Laguna III Manual page 310

ENGINE AND CYLINDER BLOCK ASSEMBLY
Oil pressure sensor: Removal - Refitting
K4M
Tightening torquesm
oil pressure sensor
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the oil pressure sensor connector (1) .
a Remove the oil pressure sensor (2) .
REFITTING
I - REFITTING PREPARATION OPERATION
a Coat the threading of the oil pressure sensor with
32 N.m
SILICONE ADHESIVE SEALANT (see Vehicle:
Parts and consumables for the repair) (04B, Con-
sumables - Products).
II - REFITTING OPERATION FOR PART
CONCERNED
a Torque tighten the oil pressure sensor (32 N.m).
a Connect the oil pressure sensor connector.
128282
128283
10A-233
10A