Renault Laguna III Manual page 985

Camshaft position sensor: Removal - Refitting
K9K, and 780
REFITTING
I - REFITTING PREPARATIONS OPERATION
a Always replace the camshaft position sensor seal.
a Lubricate the camshaft position sensor seal.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the new camshaft position sensor seal,
- the camshaft position sensor,
- the camshaft position sensor bolt.
a Tighten the camshaft position sensor bolt.
a Connect the camshaft position sensor connector.
III - FINAL OPERATION.
a Connect the intercooler air outlet pipe on the damper
valve.
a Tighten the intercooler air outlet pipe clip on the
damper valve.
a Refit the engine cover.
DIESEL INJECTION
13B-46
13B