Renault Laguna III Manual page 139

ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine - gearbox assembly: Removal - Refitting
K4M
- the union (9) from the power-assisted steering
pump high pressure pipe.
a Remove the bolt (10) from each bracket of the pow-
er-assisted steering high pressure pipe on the gear-
box.
a Remove the power-assisted steering high pressure
pipe.
a Unclip the clutch control pipe from the left-hand sus-
pended engine mounting shaft of the manual gear-
box at (11) .
a Disconnect:
131083
- the pipe:
• by pressing on the clip (12) ,
• by pulling the hydraulic clutch control.
- the reversing sensor connector (13) .
a Fit blanking plugs on the hydraulic clutch control
pipe openings.
130537
10A-62
10A
130531