Renault Laguna III Manual page 532

TOP AND FRONT OF ENGINE
Rocker cover: Removal - Refitting
K4M
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the rocker cover.
a Tighten to torque and in order:
- rocker cover bolts 1 to 13, 16 to 20, 23 to 24 (12
N.m),
- rocker cover bolts 14, 15, 21 and 22 (14 N.m).
III - FINAL OPERATION.
a Refit the camshaft sensor fitted with a new seal.
a Torque tighten the camshaft sensor bolt (10 N.m).
a Connect the camshaft sensor connector.
a Refit the camshaft dephaser solenoid valve
equipped with a new seal.
a Torque tighten the camshaft dephaser solenoid
valve sensor bolt (10 N.m).
a Connect the camshaft dephaser solenoid valve con-
nector.
a Refit:
- every camshaft seal (see 11A, Top and front of
engine, Camshaft seal, timing end: Removal -
Refitting, page 11A-287) ,
- the camshaft dephaser (see 11A, Top and front of
engine, Camshaft dephaser: Removal - Refit-
ting, page 11A-275) ,
- the timing belt (see 11A, Top and front of engine,
Timing belt: Removal - Refitting, page 11A-50) ,
- the right-hand suspended engine mounting (see
19D, Engine mounting, Right-hand suspended
engine mounting: Removal - Refitting, page
19D-51) ,
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the engine undertray,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
11A-154
11A
14497