Diesel Injection Computer: Removal - Refitting - Renault Laguna III Manual

Diesel injection computer: Removal - Refitting
M9R
Equipment required
Diagnostic tool
REMOVAL
I - REFITTING PREPARATIONS OPERATION
a Apply the procedure before repair using the Dia-
gnostic tool :
- connect the Diagnostic tool,
- select the « diesel injection computer » ,
- go to repair mode,
- display the « procedure before repair » on the se-
lected computer,
- carry out the operations described in the
« procedure before repair » section.
a Remove:
- the battery (see Battery: Removal - Refitting)
(MR 415, 80A, Battery)
- the battery tray (see Battery tray: Removal - Re-
fitting) (MR 415, 80A, Battery).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the diesel injection computer connec-
tors.
DIESEL INJECTION
122399
13B-36
a Remove:
- the diesel injection computer mounting nut (2) ,
- the diesel injection computer mounting with the die-
sel injection computer.
a Remove:
- the diesel injection computer nuts,
- the diesel injection computer from its mounting.
13B
122400
122401