Renault Laguna III Manual page 419

TOP AND FRONT OF ENGINE
Crankshaft accessories pulley: Removal - Refitting
K4M
a The camshaft grooves (8) must be horizontal and
offset downwards.
a Remove the TDC setting pin (Mot. 1489).
a Lock the flywheel using a screwdriver.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the crankshaft accessories pulley bolt (9) ,
- the crankshaft accessories pulley.
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Crankshaft acces-
sories pulley bolts (10,03,03,10)
parts always to be replaced: Crankshaft acces-
sories pulley (10,03,03,07)
14490
a Fit:
- the timing tool (Mot. 1496) (10) fitted with the (Mot.
1750) (11) ,
- a lifting eye bolt (12) to secure the timing tool (Mot.
1496) fitted with the (Mot. 1750).
14487
11A-41
11A
108873