Renault Laguna III Manual page 451

TOP AND FRONT OF ENGINE
Timing belt: Removal - Refitting
K9K
a Refit the new accessories crankshaft pulley with a
new bolt.
a Tighten to torque and angle the crankshaft acces-
sories pulley bolt (120 N.m + 95˚ ± ± ± ± 15˚).
a Remove:
- the (Mot. 1489),
- the (Mot. 1430).
III - FINAL OPERATION
a Coat the TDC pin plug threading with SILICONE
ADHESIVE SEAL (see Vehicle: Parts and con-
sumables for the repair) (04B, Consumables -
Products).
a Refit the TDC pin plug.
a Tighten the TDC pin plug.
a Fit the right-hand suspended engine mounting sup-
port.
a Refit the right-hand suspended engine mounting
support bolts.
a Tighten the right-hand suspended engine mounting
support bolts.
a Refit:
- the air filter unit (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the right-hand suspended engine mounting (see
19D, Engine mounting, Right-hand suspended
engine mounting: Removal - Refitting, page
19D-51) .
- the engine undertray,
- the engine undertray bolts,
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
123840
11A-73
11A