Renault Laguna III Manual page 175

ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine - gearbox assembly: Removal - Refitting
V9X
a Clip the max fuse box on its support.
a Fit the max fuse box.
a Refit:
- the max fuse box clip,
- the max fuse box bolt,
- the max fuse box cover,
- the protection and switching unit (see Protection
and Switching Unit: Removal - Refitting) (87G,
Engine compartment connection unit),
- the battery disconnection unit (see Battery dis-
connection unit: Removal - Refitting) (80A, Bat-
tery),
- the power-assisted steering fluid reservoir.
a Connect the power-assisted steering hose.
a Fit the power-assisted steering hose clip using the
(Mot. 1448).
a Refit the power-assisted steering hose.
a Connect the power-assisted steering hose.
a Fit the power-assisted steering hose clip using the
(Mot. 1448).
a Fit the power-assisted steering reservoir.
a Clip:
- the power assisted steering fluid reservoir,
- the lower power-assisted steering pipe on the sub-
frame.
a Fit the lower power-assisted steering pipe.
a Connect the lower power-assisted steering pipe.
a Refit:
- the bolt of the power-assisted steering bracket,
- the radiator mounting cross member (see Radiator
mounting cross member: Removal - Refitting)
(41A, Front lower structure),
- the additional radiator (see Additional radiator:
Removal - Refitting) ,
- the electric coolant pump of the exhaust cooler
(see 19A, Cooling, Electric coolant pump: Re-
moval - Refitting, page 19A-159) ,
- the pre-postheating unit (see 13C, Preheating,
Pre-postheating unit: Removal - Refitting, page
13C-1) ,
- the air outlet pipe of the air filter unit.
a Connect the oil vapour rebreathing pipe to the air fil-
ter box air outlet pipe.
a Clip on the vacuum pipes of the turbocharger control
solenoid valve.
a Torque tighten the clip of the air filter unit air out-
let pipe (6 N.m).
a Refit the intercooler air inlet pipe.
a Fit the intercooler air inlet pipe.
a Connect the intercooler air inlet pipe.
a Fit the clip of the intercooler air inlet pipe.
a Torque tighten the nut of the intercooler air inlet
pipe (21 N.m).
a Refit:
- the front impact cross member (see Front impact
cross member: Removal - Refitting) (41A, Front
lower structure),
- the « cooling radiator - condenser - intercooler »
(see 19A, Cooling, Cooling radiator: Removal -
Refitting, page 19A-28) assembly,
- the engine cooling fan assembly (see 19A, Cool-
ing, Engine cooling fan assembly: Removal -
Refitting, page 19A-121) ,
- the front end panel (see Front end panel: Remov-
al - Refitting) (42A, Upper front structure),
- the bonnet catch (see Bonnet lock: Removal -
Refitting) (52A, Non-side opening element mecha-
nisms),
- the audible warning (see Audible warning: Re-
moval - Refitting) (82B, Horn),
- the air filter unit (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the front right-hand driveshaft (see Front right-
hand driveshaft: Removal - Refitting) (29A,
Driveshafts),
- the front left-hand driveshaft (see Front left-hand
driveshaft: Removal - Refitting) (29A, Drive-
shafts),
- the headlights (see Headlight: Removal - Refit-
ting) (80B, Headlights).
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Perform the following operations:
- fill and bleed the cooling circuit (see 19A, Cooling,
Cooling system: Draining - Refilling, page 19A-
16) ,
- fill the refrigerant circuit using a refrigerant charg-
ing station (see Refrigerant circuit: Draining -
Filling) (62A, Air conditioning).
10A-98
10A