Renault Laguna III Manual page 654

TOP AND FRONT OF ENGINE
Camshaft dephaser: Removal - Refitting
K4M
Special tooling required
Mot. 1490-01 For locking and adjusting the
camshaft pulleys.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove:
- the engine cover,
- the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the throttle valve (see 12A, Fuel mixture, Throttle
valve: Removal - Refitting, page 12A-49) ,
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the engine undertray bolts,
- the engine undertray,
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the crankshaft accessories pulley (see 11A, Top
and front of engine, Crankshaft accessories
pulley: Removal - Refitting, page 11A-33) ,
- the right-hand suspended engine mounting (see
19D, Engine mounting, Right-hand suspended
engine mounting: Removal - Refitting, page
19D-51) ,
- the timing belt (see 11A, Top and front of engine,
Timing belt: Removal - Refitting, page 11A-50) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Position the (Mot. 1490-01).
a Remove the inlet camshaft dephaser blanking cover
(1) .
a Remove:
- the bolt (2) from the inlet camshaft pulley dephaser,
- the exhaust camshaft pulley nut (3) ,
- the (Mot. 1490-01),
- the inlet camshaft dephaser.
11A-276
11A
103265
103264