Renault Laguna III Manual page 680

TOP AND FRONT OF ENGINE
Camshaft seal, timing end: Removal - Refitting
K4M
a Fit the cover (15) and the collar nut (16) of the.
a Screw on the collar nut until the cover touches the
cylinder head.
a Remove:
- the collar nut from the tool,
- the cover from the,
- the stud from the tool.
III - FINAL OPERATION.
a Refit:
- the exhaust camshaft pulley.
- the camshaft dephaser (see 11A, Top and front of
engine, Camshaft dephaser: Removal - Refit-
ting, page 11A-275) ,
- the timing belt (see 11A, Top and front of engine,
Timing belt: Removal - Refitting, page 11A-50) ,
- the right-hand suspended engine mounting (see
19D, Engine mounting, Right-hand suspended
engine mounting: Removal - Refitting, page
19D-51) ,
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the engine undertray,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
130562
terior protection),
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the throttle valve (see 12A, Fuel mixture, Throttle
valve: Removal - Refitting, page 12A-49) ,
- the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
130563
11A-302
11A