Renault Laguna III Manual page 266

ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
K9K
Tightening torquesm
sump bolts on the gear-
box
sump bolts on the cylin-
der block
lower engine tie-bar
bolts
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the engine undertray bolts,
- the engine undertray.
a Drain the engine oil (see 10A, Engine and cylinder
block assembly, Engine oil: Draining - Refilling,
page 10A-100) .
a Remove:
- the bolts (1) from the front right-hand wheel drive-
shaft relay bearing,
- the front right-hand wheel driveshaft relay bearing.
44 N.m
14 N.m
180 N.m
a Remove the lower bolt (2) from the multifunction
support.
K9K, and 780
a Remove:
123838
- the catalytic converter upstream strut bolts (3) ,
- the catalytic converter upstream strut.
10A-189
10A
123832
123815