Renault Laguna III Manual page 351

ENGINE AND CYLINDER BLOCK ASSEMBLY
Multifunction support: Removal - Refitting
K4M
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the multifunction support.
a Tighten to torque and in order:
- the multifunction support bolts (44 Nm),
- the multifunction support bolt on the cylinder
block (25 N.m).
II - FINAL OPERATION.
a Refit:
- the alternator (see 16A, Starting - Charging, Al-
ternator: Removal - Refitting, page 16A-1) ,
- the power-assisted steering pump (see Power-as-
sisted steering pump: Removal - Refitting)
(36B, Power-assisted steering),
- the compressor (see Compressor: Removal - Re-
fitting) (62A, Air conditioning),
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres).
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Fill the refrigerant circuit using a refrigerant charg-
ing station (see Refrigerant circuit: Draining -
Filling) (62A, Air conditioning).
a Refit:
- the engine undertray,
- the engine cover.
115449
10A-274
10A