Renault Laguna III Manual page 748

Damper valve: Removal - Refitting
V9X
Equipment required
Diagnostic tool
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the front engine cover.
a Loosen the air inlet pipe clips (1) of the damper
valve.
a Remove the air inlet pipe of the damper valve.
FUEL MIXTURE
136268
12A-47
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector (2) from the damper valve.
a Remove:
- the damper valve bolts (3) ,
- the damper valve,
- the damper valve seal.
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Damper valve seal
(11,01,10,04).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- a new damper valve seal,
- the damper valve.
a Connect the damper valve connector.
III - FINAL OPERATION
a Refit the air inlet pipe of the damper valve.
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select « Injection computer » ,
12A
134035