Renault Laguna III Manual page 463

TOP AND FRONT OF ENGINE
Timing belt: Removal - Refitting
K4M
a Refit the lower timing cover (39) .
a Tighten to torque the lower timing cover bolts (12
N.m).
a Refit a new crankshaft accessories pulley.
a Torque tighten:
- and angle tighten a new crankshaft accessories
pulley bolt (40 N.m + 145˚ ± ± ± ± 15˚),
- and angle tighten the exhaust camshaft sprocket
nut (30 N.m + 84˚ ± ± ± ± 4),
- the camshaft dephaser bolt (100 N.m).
a Refit the camshaft dephaser plug.
130497
a Remove:
- the timing flap from the lower timing cover,
- the lifting eye bolt from the (Mot. 1496),
- the (Mot. 1496) fitted with the (Mot. 1750),
- the tool (Mot. 1489) from the cylinder block,
- the (Mot. 1490-01).
4 - Checking the tension
a Rotate the crankshaft twice clockwise at the timing
end and before aligning the marks made previously
by the operator (on the camshaft dephaser), screw
the tool (Mot. 1489) into the cylinder block.
a Move the crankshaft slowly and smoothly until it
comes into contact with the tool (Mot. 1489).
a Remove the tool (Mot. 1489).
11A-85
11A
109052