3Com 7750 Series Command Reference Manual page 12

3Com Switch 7750 Series
Command Reference Guide – Login
View
Any view
Parameter
type: User interface type.
number: User interface number.
summary: Displays the summary information about a user interface.
Description
Use the display user-interface command to display the information about a
specified user interface or all user interfaces. If the summary keyword is not specified,
this command displays user interface type, absolute/relative user interface number,
transmission speed, available command level, authentication mode, and physical
position. If the summary keyword is specified, this command displays the number
and type of the user interfaces, including those that are in use and those that are not
in use.
Example
# Display the information about user interface 0.
<3Com> display user-interface 0
Idx Type
F 0 AUX 0
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authenticate use AAA.
N : Current UI need not authentication.
P : Authenticate use current UI's password.
Table 1-1 Descriptions on the fields of the display user-interface command
Filed
+
F
Idx
Type
Tx/Rx Modem Privi Auth
9600 - 3
The user interface is in use.
The user interface operates in asynchronous mode.
The absolute index of the user interface
User interface type and the relative index
1-4
Chapter 1 Login Commands
Int
N -
Description