Display Local-User - 3Com 5500-EI PWR Reference Manual

display local-user

Syntax
display local-user [ domain isp-name | idle-cut { disable | enable } | vlan vlan-id | service-type { ftp
| lan-access | ssh | telnet | terminal } | state { active | block } | user-name user-name ]
View
Any view
Parameters
domain isp-name: Displays all local users belonging to a specified ISP domain. Here, isp-name is the
name of an ISP domain, a string of up to 128 characters. You can only specify an existing ISP domain.
idle-cut { disable | enable }: Displays the local users who are inhibited from enabling the idle-cut
function, or the local users who are allowed to enable the idle-cut function. Here, disable specifies the
inhibited local users and enable specifies the allowed local users.
vlan vlan-id: Displays the local users belonging to a specified VLAN. Here, vlan-id ranges from 1 to
4094.
service-type: Displays the local users of a specified type. You can specify one of the following user
types: ftp, lan-access (generally, this type of users are Ethernet access users, for example, 802.1x
users), ssh, telnet, and terminal (this type of user is a terminal user who logs into the switch through
the Console port).
state { active | block }: Displays the local users in a specified state. Here active represents the users
allowed to request network services, and block represents the users inhibited from requesting network
services.
user-name user-name: Displays the local user with a specified username. Here, user-name is a string
of up to 184 characters.
Description
Use the display local-user command to display information about specified or all local users.
Related commands: local-user.
Examples
# Display information about all local users.
<Sysname> display local-user
0 The contents of local user test:
State:
Idle-cut:
Access-limit:
Max AccessNum:
Bind location:
Vlan ID:
Authorization VLAN:
Active ServiceType Mask: L
Enable Idle TimeOut: 3600 seconds
Enable Current AccessNum: 1
1024
127.0.0.1/1/0/2 (NAS/UNITID/SUBSLOT/PORT)
1
2
1-13