Maintaining Is-Is - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
0000.0000.0040 GE2/0/0
Area Address(es)
Peer IP Address(es): 12.40.41.1
Uptime
Adj Protocol
Restart Capable
Suppressed Adj
MT IDs supported
Peer System Id : 0000.0000.0040
Total Peer(s): 2

7.23 Maintaining IS-IS

Maintaining IS-IS involves resetting IS-IS and clearing IS-IS statistics.
7.23.1 Resetting IS-IS Data Structure
By restarting IS-IS, you can reset IS-IS. You can also reset IS-IS in GR mode.
Context
The IS-IS data structure cannot be restored after you reset it. All the previous structure
information and the neighbor relationship are reset. Exercise caution when running this
command.
To clear the IS-IS data structure, run the following reset command in the user view.
Procedure
Step 1 Run reset isis all [ [ process-id | vpn-instance vpn-instance-name ] | graceful-restart ]
command to reset the IS-IS data structure.
By default, the IS-IS data structure is not reset.
----End
7.23.2 Resetting a Specific IS-IS Neighbor
By restarting IS-IS neighbors, you can reset the IS-IS neighbor relationship, and therefore make
the new configuration take effect.
Context
The specified IS-IS neighbor relationship is deleted after you reset a specified IS-IS neighbor
by using the reset isis peer command. Exercise caution when running this command.
Issue 02 (2014-09-30)
:10
: 00:01:14
: IPV4
: Yes
: NO
: 0(UP)
NOTICE
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
0000.0000.0040.04 Up
7 IS-IS Configuration
8s L2(L1L2) 64
*
643