Huawei Quidway NetEngine80E Configuration Manual page 342

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
The OSPF process view is displayed.
Step 3 Run:
local-mt enable
Local MT is enabled.
Step 4 (Optional) Run any of the following commands as required:
l Based on the basic ACL:
l Based on the advanced ACL:
l Based on the IP prefix:
Issue 02 (2014-09-30)
NOTE
l Local MT is applicable only to the OSPF process of a public network instance.
l Local MT does not support Forwarding Adjacency (FA).
1. Run:
local-mt filter-policy acl { acl-number | acl-name }
Configure a filtering policy for Local MT.
2. Run:
quit
Return to the system view.
3. Run:
acl { [ number ] acl-number1 | name acl-name basic [ number acl-number2 ] }
[ match-order { auto | config } ]
The basic ACL view is displayed.
4. Run:
rule [ rule-id ] { deny | permit } [ fragment-type fragment-type-name |
source { source-ip-address source-wildcard | any } | time-range time-name |
vpn-instance vpn-instance-name ]
The rule for the basic ACL is configured.
1. Run:
local-mt filter-policy acl acl-name
Configure a filtering policy for Local MT.
2. Run:
quit
Return to the system view.
3. Run:
Run acl name acl-name advance [ number acl-number2 ] [ match-order { auto |
config } ]
The basic ACL view is displayed.
4. Run:
rule [ rule-id ] { deny | permit } protocol [ source { source-ip-address
source-wildcard | any } | time-range time-name ]
The rule for the advanced ACL is configured.
Run:
local-mt filter-policy ip-prefix ip-prefix-name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
*
5 OSPF Configuration
317