Download Print this page

Configuring The Interval For Detecting Is-Is Neighboring Device Failures - Huawei Quidway NetEngine80E Configuration Manual

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l
l
l
To accelerate the IS-IS route convergence speed, configure the following parameters:
l
l
l
You can also configure convergence priorities for IPv6 IS-IS routes so that key routes can be
converged by preference when a network topology changes. This minimizes adverse impacts on
key services.
Pre-configuration Tasks
Before configuring the IPv6 IS-IS route convergence speed, complete the following tasks:
l
l
l
Data Preparation
To configure the IPv6 IS-IS route convergence speed, you need the following data.
No.

1

2
3
4
7.16.2 Configuring the Interval for Detecting IS-IS Neighboring
Device Failures
To minimize the effects caused by neighboring device failures on an IS-IS network, accelerate
the speed of detecting IS-IS neighboring device failures.
Context
Connection status between an IS-IS device and its neighboring devices can be monitored by
exchanging Hello packets at intervals. An IS-IS neighboring device is considered Down if the
Issue 02 (2014-09-30)
Establishment of neighboring relationships: establishes neighboring relationships by
exchanging Hello packets between two devices.
LSP flooding: implements LSDB synchronization between devices in the same area.
SPF calculation: uses the SPF algorithm to calculate IS-IS routes, and delivers the IS-IS
routes to the routing table.
Interval for detecting IS-IS neighboring device failures.
Flooding parameters of CSNPs and LSPs.
Interval for SPF calculation.
Configuring the link layer protocol on interfaces.
Configuring IP addresses for interfaces to ensure that neighboring nodes are reachable at
the network layer.
Configuring Basic IPv6 IS-IS
Data
Interval at which Hello packets are sent and the holding time of neighboring
devices
Flooding time of CSNPs and LSPs
Interval for SPF calculation
Route convergence priority
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Functions.
7 IS-IS Configuration
607

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e