Huawei Quidway NetEngine80E Configuration Manual page 509
Universal service router, ip routing
Hide thumbs
Also See for Quidway NetEngine80E:
- Configuration manual - reliability (1432 pages) ,
- Configuration manual (341 pages) ,
- Installation manual (169 pages)
Advertisement
HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Neighbor 3.3.3.3 is Full, interface address FE80::E0:9C69:8142:2
# Display the information in the OSPFv3 routing table on Router A. You can view the routing
entries to Router B and Router C.
[RouterA] display ospfv3 routing
Codes : E2 - Type 2 External, E1 - Type 1 External, IA - Inter-Area,
N - NSSA, U - Uninstalled, D - Denied by Import Policy
OSPFv3 Process (1)
Destination
Next-hop
2001:DB8:1::/64
directly connected, GigabitEthernet1/0/0
2001:DB8:2::/64
via FE80::E0:9C69:8142:2, GigabitEthernet1/0/1
via FE80::E0:CE19:8142:1, GigabitEthernet1/0/0
2001:DB8:3::/64
directly connected, GigabitEthernet1/0/1
2001:DB8:4::1/64
via FE80::E0:CE19:8142:1, GigabitEthernet1/0/0
As shown in the OSPFv3 routing table, the next hop address of the route to 2001:DB8:4::1/64
is GigabitEthernet1/0/0 and traffic is transmitted on the active link Router A → Router B.
Step 3 Configure OSPFv3 BFD.
# Enable global BFD on Router A.
[RouterA] bfd
[RouterA-bfd] quit
[RouterA] ospfv3
[RouterA-ospfv3-1] bfd all-interfaces enable
[RouterA-ospfv3-1] bfd all-interfaces min-transmit-interval 100 min-receive-
interval 100 detect-multiplier 4
# Enable global BFD on Router B.
[RouterB] bfd
[RouterB-bfd] quit
[RouterB] ospfv3
[RouterB-ospfv3-1] bfd all-interfaces enable
[RouterB-ospfv3-1] bfd all-interfaces min-transmit-interval 100 min-receive-
interval 100 detect-multiplier 4
# Enable global BFD on Router C.
[RouterC] bfd
[RouterC-bfd] quit
[RouterC] ospfv3
[RouterC-ospfv3-1] bfd all-interfaces enable
[RouterC-ospfv3-1] bfd all-interfaces min-transmit-interval 100 min-receive-
interval 100 detect-multiplier 4
Issue 02 (2014-09-30)
Database Summary Packets List 0
Link State Request List 0
Link State Retransmission List 0
Neighbour Event: 6
Neighbour If Id : 0xe
In the area 0.0.0.0 via interface GE1/0/1
DR Priority is 1 DR is 3.3.3.3 BDR is 1.1.1.1
Options is 0x000013 (-|R|-|-|E|V6)
Dead timer due in 00:00:37
Neighbour is up for 01:31:18
Database Summary Packets List 0
Link State Request List 0
Link State Retransmission List 0
Neighbour Event: 6
Neighbour If Id : 0x9
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
Metric
1
2
1
1
484
Hide quick links:
Advertisement
