Huawei Quidway NetEngine80E Configuration Manual page 396

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Figure 5-12 Configuring local OSPF MT
172.16.1.2/24
172.16.1.1/24
10.0.0.1/24
RouterB
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
Issue 02 (2014-09-30)
Client
GE1/0/0
RouterA
GE2/0/0
GE1/0/0
GE1/0/0
10.0.0.2/24
10.0.1.1/24
GE2/0/0
10.0.1.2/24
Enable OSPF and configure basic OSPF functions on each router.
Enable PIM-SM on each router.
Configure an MPLS RSVP-TE tunnel.
Configure an MPLS TE tunnel and enable IGP Shortcut for it on Router B.
Enable local OSPF MT on Router B.
IP address of each interface on each router, as shown in
Table 5-3 IP address of each interface
router
Router A
Router B
Router C
Router D
Router E
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Server
RouterE
GE2/0/0
10.0.2.2/24
GE2/0/0
10.0.2.1/24
RouterC
Tunnel1/0/0
IP Address of Loopback 0
1.1.1.1/32
2.2.2.2/32
3.3.3.3/32
4.4.4.4/32
5.5.5.5/32
5 OSPF Configuration
192.168.3.2/24
GE2/0/0
192.168.3.1/24
GE1/0/0
10.0.3.2/24
GE1/0/0
10.0.3.1/24
RouterD
Table 5-3
371