Huawei Quidway NetEngine80E Configuration Manual page 356

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospf [ process-id ]
The OSPF view is displayed.
Step 3 Run any of the following commands as required:
l Based on the basic ACL:
l Based on the advanced ACL:
Issue 02 (2014-09-30)
1. Run:
graceful-restart [ { period period } | partial | planned-only ]
role { { { acl-number acl-number | acl-name acl-name } | ignore-external-
lsa | planned-only }
The GR session parameters are set.
2. Run:
quit
Return to the system view.
3. Run:
acl { [ number ] acl-number1 | name acl-name basic [ number acl-number2 ] }
[ match-order { auto | config } ]
The basic ACL view is displayed.
4. Run:
rule [ rule-id ] { deny | permit } [ fragment-type fragment-type-name |
source { source-ip-address source-wildcard | any } | time-range time-name |
vpn-instance vpn-instance-name ]
The rule for the basic ACL is configured.
1. Run:
graceful-restart [ { period period } | partial | planned-only ]
role { { acl-name acl-name | ignore-external-lsa | planned-only }
never }
The GR session parameters are set.
2. Run:
quit
Return to the system view.
3. Run:
Run acl name acl-name advance [ number acl-number2 ] [ match-order { auto |
config } ]
The basic ACL view is displayed.
4. Run:
rule [ rule-id ] { deny | permit } protocol [ source { source-ip-address
source-wildcard | any } | time-range time-name ]
The rule for the advanced ACL is configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
| never }
*
5 OSPF Configuration
*
helper-
*
helper-
*
|
*
331