Example For Configuring Inter-As 6Pe Optionb (With Asbrs As Pes) - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l
9.18.5 Example for Configuring Inter-AS 6PE OptionB (with ASBRs
as PEs)
This section provides an example of how to configure inter-AS IPv6 Provider Edge (6PE)
OptionB (with ASBRs as PEs) for separate IPv6 networks that connect to different ASs to
communicate over MPLS tunnels on the IPv4 public network.
Issue 02 (2014-09-30)
ip address 3.3.3.3 255.255.255.255
#
bgp 200
peer 2001:db8:2::1 as-number 300
peer 2.2.2.2 as-number 200
peer 2.2.2.2 connect-interface LoopBack0
#
ipv4-family unicast
undo synchronization
peer 2.2.2.2 enable
#
ipv6-family unicast
undo synchronization
import-route direct
peer 2.2.2.2 enable
peer 2.2.2.2 label-route-capability
peer 2001:db8:2::1 enable
#
ospf 1
area 0.0.0.0
network 3.3.3.3 0.0.0.0
network 20.0.0.0 0.0.0.3
#
return
Configuration file of CE2
#
sysname CE2
#
ipv6
#
interface Pos1/0/0
link-protocol ppp
ipv6 enable
ipv6 address 2001:db8:2::1/64
#
interface LoopBack0
ip address 4.4.4.4 255.255.255.255
#
interface LoopBack1
ipv6 enable
ipv6 address 2001:db8:6::6/64
#
bgp 300
peer 2001:db8:2::2 as-number 200
#
ipv4-family unicast
undo synchronization
#
ipv6-family unicast
undo synchronization
network 2001:db8:6:: 64
peer 2001:db8:2::2 enable
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 BGP4+ Configuration
1144