Huawei Quidway NetEngine80E Configuration Manual page 691

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure an IP address for each interface.
Step 2 Configure basic IS-IS functions.
# Configure Router A.
[RouterA] isis 1
[RouterA-isis-1] network-entity 10.0000.0000.0001.00
[RouterA-isis-1] quit
[RouterA]
[RouterA-Pos1/0/0] isis enable 1
[RouterA-Pos1/0/0] quit
# Configure Router B.
[RouterB] isis 1
[RouterB-isis-1] network-entity 10.0000.0000.0002.00
[RouterB-isis-1] quit
[RouterB] interface pos 1/0/0
[RouterB-Pos1/0/0] isis enable 1
[RouterB-Pos1/0/0] quit
Step 3 Set up an EBGP connection.
# Configure Router B.
[RouterB] bgp 65008
[RouterB-bgp] router-id 1.1.1.1
[RouterB-bgp] peer 10.2.1.2 as-number 65009
[RouterB-bgp] ipv4-family unicast
[RouterB-bgp-af-ipv4] network 10.2.1.0 255.255.255.0
# Configure Router C.
[RouterC] bgp 65009
[RouterC-bgp] router-id 2.2.2.2
[RouterC-bgp] peer 10.2.1.1 as-number 65008
[RouterC-bgp] ipv4-family unicast
[RouterC-bgp-af-ipv4] network 10.2.1.0 255.255.255.0
Step 4 Configure IS-IS to import BGP routes.
Issue 02 (2014-09-30)
Enable IS-IS and specify network entities on Router A and Router B.
Set up an EBGP connection between Router B and Router C.
Configure IS-IS and BGP to import routes of each other on Router B. Then check routing
information in routing tables.
Area addresses of Router A and Router B
Router ID and AS number of Router B
Router ID and AS number of Router C
interface pos 1/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 IS-IS Configuration
666