Download Print this page

Huawei Quidway NetEngine80E Configuration Manual page 721

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
As shown in the preceding command output, link-node dual protection is enabled from Router
A to Router D.
# Run the display fib 10.5.1.1 verbose command on Router A to check the backup forwarding
entry from Router A to Router D.
<RouterA> display fib 10.5.1.1 verbose
Route Entry Count: 1
Destination: 10.5.1.0
Nexthop
LocalAddr
Flags
ATIndex
LspFwdFlag : 0
InLabel
BGPNextHop : 0.0.0.0
QosInfo
NexthopBak : 10.2.0.2
LspTokenBak: 0x0
LspToken_ForInLabelBak : 0x0
EntryRefCount : 0
VlanId : 0x0
LspType
MplsMtu
NextToken
Label_NextToken : 0
LspBfdState
As shown in the command output, the master link from Router A to Router D is Link T, the
relevant backup link follows the route with GE 2/0/0 as the outbound interface and 10.2.0.2 as
the next hop.
Step 5 Verify the configuration.
# Run the shutdown command on GE 2/0/0 of Router C to make the link down.
[RouterC] interface gigabitethernet 2/0/0
[RouterC-GigabitEthernet2/0/0] shutdown
# Run the display fib 10.5.1.1 verbose command immediately on Router A to check information
about the route from Router A to Router D.
<RouterA> display fib 10.5.1.1 verbose
Route Entry Count: 1
Destination: 10.5.1.0
Nexthop
LocalAddr
Flags
ATIndex
LspFwdFlag : 0
InLabel
BGPNextHop : 0.0.0.0
QosInfo
NexthopBak : 0.0.0.0
LspTokenBak: 0x0
LspToken_ForInLabelBak : 0x0
EntryRefCount : 0
VlanId
LspType
MplsMtu
NextToken
Label_NextToken : 0
LspBfdState
Issue 02 (2014-09-30)
: 10.1.0.2
: 10.1.0.1
: DGU
: 0
: NULL
: 0x0
: 0
: 0
: 0
: 0
: 10.2.0.2
: 10.2.0.1
: DGU
: 0
: NULL
: 0x0
: 0x0
: 0
: 0
: 0
: 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Mask
: 255.255.255.0
OutIf
: GigabitEthernet1/0/0
LocalMask: 0.0.0.0
Age
: 6sec
Slot
: 0
LspToken : 0x0
OriginAs : 0
PeerAs
: 0
OriginQos: 0x0
OutIfBak : GigabitEthernet2/0/0
InLabelBak : NULL
Label_ForLspTokenBak
Gateway_ForLspTokenBak : 0
IfIndex_ForLspTokenBak : 0
Label : 0
Mask
: 255.255.255.0
OutIf
: GigabitEthernet2/0/0
LocalMask: 0.0.0.0
Age
: 124sec
Slot
: 0
LspToken : 0x0
OriginAs : 0
PeerAs
: 0
OriginQos: 0x0
OutIfBak : [No Intf]
InLabelBak : NULL
Label_ForLspTokenBak
Gateway_ForLspTokenBak : 0
IfIndex_ForLspTokenBak : 0
Label : 0
7 IS-IS Configuration
: 0
: 0
696

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e