Huawei Quidway NetEngine80E Configuration Manual page 708

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Figure 7-12 Networking diagram of basic IS-IS IPv6 feature
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Enable the capability of IPv6 forwarding, and configure IPv6 address for each interface. Take
the display on Router A as an example. The configurations of Router B, Router C and Router
D are similar to that of Router A. The detailed configurations are not mentioned here.
<HUAWEI> system-view
[HUAWEI] sysname RouterA
[RouterA] ipv6
[RouterA] interface pos 1/0/0
Issue 02 (2014-09-30)
GE1/0/0
2001:db8:1::2/64
RouterA
L1
GE1/0/0
2001:db8:1::1/64
GE2/0/0
2001:db8:2::1/64
GE1/0/0
IS-IS
2001:db8:2::2/64
Area10
RouterB
L1
Enable the capability of IPv6 forwarding on each router.
Configure an IPv6 address for each interface.
Enable IS-IS on each router.
Configure the level.
Specify the network entity.
IPv6 address of each interface on Router A, Router B, Router C, and Router D
Area numbers of Router A, Router B, Router C, and Router D
Levels of Router A, Router B, Router C, and Router D
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2001:db8:4::1/64
GE3/0/0
2001:db8:3::1/64
GE1/0/0
RouterC 2001:db8:3::2/64
L1/L2
7 IS-IS Configuration
GE2/0/0
RouterD
L2
IS-IS
Area20
683