Download Print this page

Huawei Quidway NetEngine80E Configuration Manual page 749

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
172.16.1.0/24
As shown in the routing table, the next hop address of the route to 172.16.1.0/24 is 3.3.3.2 and
traffic is transmitted on the active link from Router A to Router B.
Step 3 Set the interface cost.
# Configure Router A.
[RouterA] interface gigabitethernet 2/0/0
[RouterA-GigabitEthernet1/0/0] isis cost 5
[RouterA-GigabitEthernet1/0/0] quit
# Configure Router B.
[RouterB] interface gigabitethernet 2/0/0
[RouterB-GigabitEthernet1/0/0] isis cost 5
[RouterB-GigabitEthernet1/0/0] quit
Step 4 Configure BFD of the IS-IS process.
# Enable BFD of the IS-IS process on Router A.
[RouterA] bfd
[RouterA-bfd] quit
[RouterA] isis
[RouterA-isis-1] bfd all-interfaces enable
[RouterA-isis-1] quit
# Enable BFD of the IS-IS process on Router B.
[RouterB] bfd
[RouterB-bfd] quit
[RouterB] isis
[RouterB-isis-1] bfd all-interfaces enable
[RouterB-isis-1] quit
# Enable BFD of the IS-IS process on Router C.
[RouterC] bfd
[RouterC-bfd] quit
[RouterC] isis
[RouterC-isis-1] bfd all-interfaces enable
[RouterC-isis-1] quit
# After the preceding configurations are complete, run the display isis bfd session all command
on Router A, Router B, or Router C. You can view that the status of BFD is Up.
Take the display of Router A as an example:
[RouterA] display isis bfd session all
Peer System ID : 0000.0000.0002
TX : 100
RX : 100
TX : 10
RX : 10
Multiplier : 3
Diag : No diagnostic information
Peer System ID : 0000.0000.0003
Issue 02 (2014-09-30)
1.1.1.1/32
Direct
2.2.2.0/24
ISIS-L2
3.3.3.0/24
Direct
3.3.3.1/32
Direct
127.0.0.0/8
Direct
127.0.0.1/32
Direct
ISIS-L2
15
BFD session information for ISIS(1)
-----------------------------------
BFD State : up
LocDis : 8193
BFD State : up
LocDis : 8192
RemDis : 8192
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
0
0
D
15
20
D
1.1.1.2
0
0
D
3.3.3.1
0
0
D
0
0
D
0
0
D
20
D
3.3.3.2
Interface : GE2/0/0
Peer IP Address : 3.3.3.2
Local IP Address: 3.3.3.1
Peer IP Address : 3.3.3.2
Local IP Address: 3.3.3.1
Type : L2
Interface : GE1/0/0
7 IS-IS Configuration
127.0.0.1
InLoopBack0
GigabitEthernet1/0/0
GigabitEthernet2/0/0
127.0.0.1
InLoopBack0
127.0.0.1
InLoopBack0
127.0.0.1
InLoopBack0
GigabitEthernet2/0/0
724

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e