Example For Configuring Basic Is-Is Ipv6 Functions - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l

7.24.9 Example for Configuring Basic IS-IS IPv6 Functions

This part provides an example for interconnecting IPv6 networks through IS-IS.
Networking Requirements
As shown in
l
l
l
Issue 02 (2014-09-30)
ip address 10.0.3.1 255.255.255.0
isis enable 1
pim sm
#
interface GigabitEthernet2/0/0
ip address 10.0.2.1 255.255.255.0
isis enable 1
pim sm
mpls
mpls te
mpls rsvp-te
#
interface LoopBack0
ip address 4.4.4.4 255.255.255.255
isis enable 1
pim sm
#
return
Configuration file of Router E
#
sysname RouterE
#
router id 5.5.5.5
#
multicast routing-enable
#
isis 1
is-level level-2
cost-style wide
network-entity 10.0000.0000.0005.00
#
interface GigabitEthernet1/0/0
ip address 10.0.3.3 255.255.255.0
isis enable 1
pim sm
#
interface Ethernet2/0/0
ip address 192.168.3.1 255.255.255.0
isis enable 1
pim sm
#
interface LoopBack0
ip address 5.5.5.5 255.255.255.255
isis enable 1
pim sm
#
return
Figure 7-12:
Router A, Router B, Router C, and Router D belong to the same AS. They are interconnected
through IS-IS in the IPv6 network.
Router A, Router B, and Router C belong to area 10. Router D belongs to area 20.
Router A and Router B are Level-1 routers. Router C is a Level-1-2 router. Router D is a
Level-2 router.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 IS-IS Configuration
682