Huawei Quidway NetEngine80E Configuration Manual page 729
Universal service router, ip routing
Hide thumbs
Also See for Quidway NetEngine80E:
- Configuration manual - reliability (1432 pages) ,
- Configuration manual (341 pages) ,
- Installation manual (169 pages)
Advertisement
HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
# Configure a tunnel interface on P1. The configuration of P3 is similar to that of P1 and is not
mentioned here.
[P1] interface Tunnel1/0/0
[P1-Tunnel1/0/0] to_P3
[P1-Tunnel1/0/0] ip address unnumbered interface LoopBack0
[P1-Tunnel1/0/0] tunnel-protocol mpls te
[P1-Tunnel1/0/0] destination 3.3.3.3
[P1-Tunnel1/0/0] mpls te tunnel-id 100
[P1-Tunnel1/0/0] mpls te bandwidth ct0 200000
[P1-Tunnel1/0/0] mpls te path explicit-path to_P3
[P1-Tunnel1/0/0] mpls te commit
After the preceding configurations, run the display interface tunnel 1/0/0 command on P1 and
P3. The command output shows that the status of the tunnel interface is Up.
[P1] display interface tunnel 1/0/0
Tunnel1/0/0 current state : UP
Line protocol current state : UP
Last up time: 2009-09-29, 16:35:10
Description : to_P3
Step 4 Configure LDP over TE.
Enable MPLS LDP, and configure PE1, P1, P3, and P5. The configurations of other nodes are
similar to the configurations of PE1, P1, P3, and P5 and therefore are not mentioned here.
# Configure PE1.
[PE1] mpls lsr-id 7.7.7.7
[PE1] mpls
[PE1-mpls] quit
[PE1] mpls ldp
[PE1-mpls-ldp] quit
[PE1] interface gigabitethernet 1/0/0
[PE1-GigabitEthernet1/0/0] mpls
[PE1-GigabitEthernet1/0/0] mpls ldp
[PE1-GigabitEthernet1/0/0] quit
# Configure P1.
[P1] mpls ldp
[P1] interface gigabitethernet 2/0/0
[P1-GigabitEthernet2/0/0] mpls ldp
[P1-GigabitEthernet2/0/0] quit
[P1] interface gigabitethernet 3/0/0
[P1-GigabitEthernet3/0/0] mpls ldp
[P1-GigabitEthernet3/0/0] quit
[P1] interface gigabitethernet 3/1/0
[P1-GigabitEthernet3/1/0] mpls ldp
[P1-GigabitEthernet3/1/0] quit
[P1] mpls ldp remote-peer to_P3
[P1-mpls-ldp-remote-to_P3] remote-ip 3.3.3.3
[P1-mpls-ldp-remote-to_P3] quit
# Configure P3.
[P3] mpls ldp
[P3] interface gigabitethernet 2/0/0
[P3-GigabitEthernet2/0/0] mpls ldp
[P3-GigabitEthernet2/0/0] quit
[P3] interface gigabitethernet 3/0/0
[P3-GigabitEthernet3/0/0] mpls ldp
[P3-GigabitEthernet3/0/0] quit
[P3] interface gigabitethernet 3/1/0
[P3-GigabitEthernet3/1/0] mpls ldp
[P3-GigabitEthernet3/1/0] quit
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 IS-IS Configuration
704
Hide quick links:
Advertisement
