Huawei Quidway NetEngine80E Configuration Manual page 704

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
10.0.2.0/24
10.0.3.0/24
# View the multicast routing table on Router C spanned by the TE tunnel.
[RouterC] display multicast routing-table
No multicast routing entry is displayed. This indicates that the multicast packet is discarded.
Step 4 Configure local MT.
# Enable local MT on Router B.
[RouterB] isis
[RouterB-isis-1] local-mt enable
Step 5 Verify the configuration.
# View the multicast routing table on Router C again. You can find that multicast routes are
displayed.
[RouterC] display multicast routing-table
Multicast routing table of VPN-Instance: public net
Total 1 entry
00001. (192.168.3.2, 224.31.31.31)
# View the MIGP routing table on Router B.
[RouterB] display migp routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: MIGP
Destination/Mask
The physical outgoing interface of the next hop of the route with the previous outgoing interface
being a TE tunnel interface is found in the MIGP routing table.
----End
Configuration Files
l
Issue 02 (2014-09-30)
15
15
Flags: D-Direct, A-Added to URT, L-Advertised in LSPs, S-IGP Shortcut,
Uptime: 00:00:19
Upstream Interface: GigabitEthernet2/0/0
List of 1 downstream interface
1: GigabitEthernet1/0/0
Destinations : 5
Proto
4.4.4.4/32 ISIS
5.5.5.5/32 ISIS
10.0.2.0/24 ISIS
10.0.3.0/24 ISIS
192.168.3.0/24 ISIS
Configuration file of Router A
#
sysname RouterA
#
router id 1.1.1.1
#
multicast routing-enable
#
isis 1
is-level level-2
cost-style wide
network-entity 10.0000.0000.0001.00
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NULL Tun1/0/0
NULL Tun1/0/0
U-Up/Down Bit Set
Routes : 5
Pre Cost Flags NextHop
15 20 10.0.1.1
15 30 10.0.1.1
15 20 10.0.1.1
15 30 10.0.1.1
15 40 10.0.1.1
7 IS-IS Configuration
2.2.2.2 A/S/-/-
2.2.2.2 A/S/-/-
Interface
GE2/0/0
GE2/0/0
GE2/0/0
GE2/0/0
GE2/0/0
679