Ospfv3 Configuration - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
About This Chapter
By building Open Shortest Path First Version 3 (OSPFv3) networks, you can enable OSPFv3
to discover and calculate routes in ASs. OSPFv3 is applicable to a large-scale network that
consists of hundreds of routers.
6.1 Introduction
The OSPFv3 protocol, which is a link-state IGP, runs on IPv6 networks.
6.2 Configuring Basic OSPFv3 Functions
Before building OSPFv3 networks, you need to configure basic OSPFv3 functions.
6.3 Establishing or Maintaining OSPFv3 Neighbor Relationship
By establishing and maintaining OSPFv3 neighbor relationships or adjacencies, you can build
OSPFv3 networks.
6.4 Configuring OSPFv3 Areas
OSPFv3 supports stub areas and virtual links, the principle and usage scenario of which are
similar to those in OSPFv2.
6.5 Configuring OSPFv3 NSSA Areas
Configuring a non-backbone area on the border of an AS as an NSSA does not transmit routes
learned from other areas in the AS but imports AS external routes. This reduces bandwidth and
storage resource consumption on the router.
6.6 Configuring OSPFv3 Route Attributes
By setting OSPFv3 route attributes, you can change OSPFv3 routing policies to meet the
requirements of complex networks.
6.7 Controlling OSPFv3 Routing Information
This section describes how to control OSPFv3 routing information. Detailed operations include
configuring route aggregation, filtering the received routes, and importing external routes.
6.8 Optimizing an OSPFv3 Network
By configuring OSPFv3 functions in special network environments, you can adjust and optimize
the OSPFv3 network performance.
6.9 Configuration OSPFv3 GR
Issue 02 (2014-09-30)
6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

OSPFv3 Configuration

6 OSPFv3 Configuration
404