Huawei Quidway NetEngine80E Configuration Manual page 386

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Assign an IP address to each interface.
For details about the configuration, see the configuration files.
Step 2 Configure basic OSPF functions.
5.2 Configuring Basic OSPF Functions
details about the configuration, see the configuration files.
Step 3 Configure Router D to import the static route 200.0.0.0/8.
[RouterD] ip route-static 200.0.0.0 8 null 0
[RouterD] ospf
[RouterD-ospf-1] import-route static
[RouterD-ospf-1] quit
# Check the OSPF routing table on Router C.
[RouterC] display ospf routing
Routing for Network
Destination
192.168.0.0/24
192.168.1.0/24
192.168.2.0/24
Routing for ASEs
Destination
200.0.0.0/8
Issue 02 (2014-09-30)
Enable OSPF and configure basic OSPF functions on each router.
Configure Router D to import the static route 200.0.0.0/8.
Configure Area 1 as a stub area.
Disable Router A from advertising Type 3 LSAs to the stub area.
Router ID 1.1.1.1 of Router A; OSPF process ID 1; network segment 192.168.0.0/24 of
Area 0; network segment 192.168.1.0/24 of Area 1
Router ID 2.2.2.2 of Router B; OSPF process ID 1; network segment 192.168.0.0/24 of
Area 0; network segment 192.168.2.0/24 of Area 2
Router ID 3.3.3.3 of Router C; OSPF process ID 1; network segment 192.168.1.0/24 of
Area 1
Router ID 4.4.4.4 of Router D; OSPF process ID 1; network segment 192.168.2.0/24 of
Area 2
OSPF Process 1 with Router ID 3.3.3.3
Routing Tables
Cost
2
1
3
Cost Type
4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
shows how to configure basic OSPF functions. For
Type NextHop
Inter-area 192.168.1.1
Stub 192.168.1.2
Inter-area 192.168.1.1
Tag NextHop
Type1 1 192.168.1.1
5 OSPF Configuration
AdvRouter Area
1.1.1.1 0.0.0.1
3.3.3.3 0.0.0.1
1.1.1.1 0.0.0.1
AdvRouter
4.4.4.4
361