Huawei Quidway NetEngine80E Configuration Manual page 675

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Configure an ATM network.
# Configure Router A.
[RouterA] interface atm 1/0/0.1 p2p
[RouterA-Atm1/0/0.1] ip address 10.1.1.1 24
[RouterA-Atm1/0/0.1] pvc 2/2
[RouterA-atm-pvc-Atm1/0/0.1-2/2] map ip 10.1.1.2 broadcast
[RouterA-atm-pvc-Atm1/0/0.1-2/2] quit
[RouterA-Atm1/0/0.1] quit
# Configure Router B.
[RouterB] interface atm 1/0/0.1 p2p
[RouterB-Atm1/0/0.1] ip address 10.1.1.2 24
[RouterB-Atm1/0/0.1] pvc 2/2
[RouterB-atm-pvc-Atm1/0/0.1-2/2] map ip 10.1.1.1 broadcast
[RouterB-atm-pvc-Atm1/0/0.1-2/2] quit
[RouterB-Atm1/0/0.1] quit
[RouterB] interface atm 2/0/0.1 p2p
[RouterB-Atm2/0/0.1] ip address 10.1.2.1 24
[RouterB-Atm2/0/0.1] pvc 2/2
[RouterB-atm-pvc-Atm2/0/0.1-2/2] map ip 10.1.2.2 broadcast
[RouterB-atm-pvc-Atm2/0/0.1-2/2] quit
[RouterB-Atm2/0/0.1] quit
# Configure Router C.
[RouterC] interface atm 2/0/0.1 p2p
[RouterC-Atm2/0/0.1] ip address 10.1.2.2 24
[RouterC-Atm2/0/0.1] pvc 2/2
[RouterC-atm-pvc-Atm2/0/0.1-2/2] map ip 10.1.2.1 broadcast
[RouterC-atm-pvc-Atm2/0/0.1-2/2] quit
[RouterC-Atm2/0/0.1] quit
Step 2 Configure basic IS-IS functions.
# Configure Router A.
[RouterA] isis 1
[RouterA-isis-1] is-level level-1
[RouterA-isis-1] network-entity 10.0000.0000.0001.00
[RouterA-isis-1] quit
[RouterA] interface atm 1/0/0.1 p2p
[RouterA-Atm1/0/0.1] isis enable 1
[RouterA-Atm1/0/0.1] quit
# Configure Router B.
[RouterB] isis 1
[RouterB-isis-1] network-entity 10.0000.0000.0002.00
[RouterB-isis-1] quit
[RouterB] interface atm 1/0/0.1 p2p
Issue 02 (2014-09-30)
Enable IS-IS on each router, configure the level, and specify an NET.
Area addresses of Router A, Router B, and Router C
Levels of Router A, Router B, and Router C
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 IS-IS Configuration
650