Download Print this page

Huawei Quidway NetEngine80E Configuration Manual page 482

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Procedure
l
l
l
l
l
----End
Example
Run the display ospfv3 command, and you can view the SA configured in an OSPFv3 process.
For example:
<HUAWEI> display ospfv3
Routing Process "OSPFv3 (1)" with ID 0.0.0.0
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Stub router capability: enabled
Number of external LSA 0. Checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of FULL neighbors 0
Number of Exchange and Loading neighbors 0
Maximum ASE LS ID 1 and Unused list Count 0
Number of LSA originated 0
Number of LSA received 0
SPF Count
Non Refresh LSA
Non Full Nbr Count : 0
Number of areas in this router is 1
IP security association configured: sa1
Run the display ospfv3 area command, and you can view the SA configured in an OSPFv3
area. For example:
<HUAWEI> display ospfv3 area
OSPFv3 Process (1)
Area BACKBONE(0) Status: down
Number of interfaces in this area is 0
SPF algorithm executed 0 times
Number of LSA 0. Checksum Sum 0x0000
Number of Unknown LSA 0
Area Bdr Router count: 0
Area ASBdr Router count: 0
IP security association configured: sa1
Area 0.0.0.1 Status: up
Number of interfaces in this area is 1
SPF algorithm executed 3 times
Number of LSA 4. Checksum Sum 0x23AC8
Number of Unknown LSA 0
Area Bdr Router count: 0
Area ASBdr Router count: 1
IP security association configured: sa4
Issue 02 (2014-09-30)
Run the display ospfv3 [ process-id ] command to view the SA applied in a specified
process.
Run the display ospfv3 [ process-id ] interface command to view the SA applied on a
specified interface.
Run the display ospfv3 [ process-id ] area [ area-id ] command to view the SA applied
in a specified area.
Run the display ospfv3 [ process-id ] vlink command to view the SA applied on the peer
end of a virtual link.
Run the display ospfv3 [ process-id ] sham-link command to view the SA applied on the
peer end of a sham link.
: 0
: 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration
457

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e