Checking The Configurations - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l
----End

6.13.4 Checking the Configurations

After configuring Open Shortest Path First version 3 (OSPFv3) generalized TTL security
mechanism (GTSM) and an authentication mode, check the configurations.
Prerequisites
Improvements on OSPFv3 network security have been made.
Procedure
l
----End
Example
Run the display gtsm statistics command. The command output shows GTSM statistics on all
boards, including the total number of OSPFv3 packets, number of received OSPFv3 packets,
and number of discarded OSPFv3 packets.
<HUAWEI> display gtsm statistics all
GTSM Statistics Table

----------------------------------------------------------------

SlotId
----------------------------------------------------------------
0
0
0
0
0
0
----------------------------------------------------------------
Issue 02 (2014-09-30)
OSPFv3 process authentication is configured.
Configure OSPFv3 interface authentication.
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
ospfv3 authentication-mode { hmac-sha256 key-id key-id { plain plain-text
| [ cipher ] cipher-text } | keychain keychain-name } [ instance instance-
id ]
OSPFv3 interface authentication is configured.
NOTE
OSPFv3 interface authentication takes precedence over OSPFv3 area authentication.
If you use HMAC-SHA256 authentication, the authentication and password configurations on all
the interfaces on the same network segment must be the same.
Run the display gtsm statistics { slot-id | all } command to check GTSM statistics.
Protocol Total Counters
BGP 0
BGPv6 0
OSPF 0
LDP 0
OSPFv3 0
RIP 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Drop Counters Pass Counters
0 0
0 0
0 0
0 0
0 0
0 0
6 OSPFv3 Configuration
462