Huawei Quidway NetEngine80E Configuration Manual page 318

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
The system view is displayed.
Step 2 Run:
ospf [ process-id ]
The OSPF process view is displayed.
Step 3 Run:
import-route { limit limit-number | { bgp [ permit-ibgp ] | direct | unr | rip
[ process-id-rip ] | static | isis [ process-id-isis ] | ospf [ process-id-ospf ] }
[ cost cost | type type | tag tag | route-policy route-policy-name ]
Routes are imported from another protocol.
Step 4 (Optional) Run:
default { cost { cost | inherit-metric } | limit limit | tag tag | type type }
The default values of parameters (the cost, number of routes, tag, and type) are set for imported
routes.
When OSPF imports external routes, you can set default values for some additional parameters,
such as the cost, number of routes to be imported, route tag, and route type. The route tag is used
to identify the protocol-related information. For example, it can be used to differentiate AS
numbers carried in BGP routes imported by OSPF.
By default, the cost of the external routes imported by OSPF is 1; a maximum of 2147483647
routes can be imported each time; the type of the imported external routes is Type 2; the default
tag value of the imported routes is 1.
Step 5 (Optional) Run any of the following commands as required:
filter-policy { acl-number | acl-name acl-name | ip-prefix ip-prefix-name | route-
policy route-policy-name } export [ protocol [ process-id ] ]
l Based on the basic ACL:
Issue 02 (2014-09-30)
NOTE
You can run one of the following commands to set the cost of the imported route. The following commands
are listed in descending order of priorities.
l Run the apply cost command to set the cost of a route.
l Run the import-route command to set the cost of the imported route.
l Run the default command to set the default cost of the imported route.
1. Run:
filter-policy { acl-number | acl-name acl-name } export [ protocol [ process-
id ] ]
Routes imported using
2. Run:
quit
Return to the system view.
3. Run:
acl { [ number ] acl-number1 | name acl-name basic [ number acl-number2 ] }
[ match-order { auto | config } ]
The basic ACL view is displayed.
4. Run:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 3 can be advertised only when meeting filtering conditions.
5 OSPF Configuration
*
}
*
293