Huawei Quidway NetEngine80E Configuration Manual page 397
Universal service router, ip routing
Hide thumbs
Also See for Quidway NetEngine80E:
- Configuration manual - reliability (1432 pages) ,
- Configuration manual (341 pages) ,
- Installation manual (169 pages)
Advertisement
HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
l
Procedure
Step 1 Assign an IP address to each interface.
For details about the configuration, see the configuration files.
Step 2 Configure basic OSPF functions.
5.2 Configuring Basic OSPF Functions
details about the configuration, see the configuration files.
Step 3 Configure PIM-SM.
# Enable PIM-SM on Router A.
[RouterA] multicast routing-enable
[RouterA] interface Gigabitethernet 2/0/0
[RouterA-GigabitEthernet2/0/0] pim sm
[RouterA-GigabitEthernet2/0/0] quit
[RouterA] interface Gigabitethernet 1/0/0
[RouterA-GigabitEthernet1/0/0] pim sm
[RouterA-GigabitEthernet1/0/0] quit
Enable PIM-SM on each router. The configurations on Router B, Router C, Router D, and Router E are similar
to those on Router A. The detailed configurations are not provided here.
# Enable IGMP on Ethernet 1/0/0 of Router A.
[RouterA] interface Gigabitethernet 1/0/0
[RouterA-GigabitEthernet1/0/0] igmp enable
[RouterA-GigabitEthernet1/0/0] igmp version 3
[RouterA-GigabitEthernet1/0/0] quit
# Configure a C-BSR and a C-RP. Configure a C-BSR and a C-RP on Router D.
[RouterD] pim
[RouterD-pim] c-bsr Gigabitethernet 1/0/0
[RouterD-pim] c-rp Gigabitethernet 1/0/0
[RouterD-pim] quit
# View the multicast routing table on Router C.
[RouterC] display multicast routing-table
Multicast routing table of VPN-Instance: public net
Total 3 entries
00001. (192.168.3.8, 224.31.31.31)
00002. (192.168.3.9, 224.31.31.31)
00003. (192.168.3.10, 224.31.31.31)
Issue 02 (2014-09-30)
The TE tunnel interface Tunnel 1/0/0 uses the IP address of Loopback 0 and runs the MPLS
TE protocol. The destination address of the TE tunnel is 4.4.4.4; the tunnel ID is 100; RSVP-
TE is used as a signaling protocol on the TE tunnel.
NOTE
Uptime: 15:03:04
Upstream Interface: GigabitEthernet2/0/0
List of 1 downstream interface
1:
GigabitEthernet1/0/0
Uptime: 15:03:04
Upstream Interface: GigabitEthernet2/0/0
List of 1 downstream interface
1:
GigabitEthernet1/0/0
Uptime: 15:03:04
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
shows how to configure basic OSPF functions. For
5 OSPF Configuration
372
Hide quick links:
Advertisement
