Download Print this page

Checking The Configurations - Huawei Quidway NetEngine80E Configuration Manual

Universal service router, ip routing
Hide thumbs Also See for Quidway NetEngine80E:

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
----End

6.7.6 Checking the Configurations

After OSPFv3 route attributes are configured, you can check the OSPFv3 interface, LSDB, and
routing table.
Prerequisites
Controlling OSPFv3 Routing Information has been configured.
Procedure
l
l
l
----End
6.8 Optimizing an OSPFv3 Network
By configuring OSPFv3 functions in special network environments, you can adjust and optimize
the OSPFv3 network performance.
6.8.1 Before You Start
Before optimizing an OSPFv3 network, familiarize yourself with the usage scenario, complete
pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
By adjusting the OSPFv3 timer, you can change the convergence speed of an OSPFv3 network
and the network overload caused by protocol packets. On low-speed links, you need to consider
Issue 02 (2014-09-30)
filter route-policy route-policy-name export
The filter outgoing Type 3 LSAs in the area are filtered.
Run the commands as follow to check the OSPFv3 route aggregation:
– display ospfv3 [ process-id ] abr-summary-list [ ipv6-address prefix-length ]
– display ospfv3 [ process-id ] asbr-summary [ ipv6-address prefix-length ]
[ verbose ]
Run the commands as follow to check the LSDB information about OSPFv3:
– display ospfv3 [ process-id ] lsdb [ area area-id ] [ originate-router advertising-
router-id | self-originate ] [ { router | network | inter-router [ asbr-router asbr-
router-id ] | { inter-prefix | nssa } [ ipv6-address prefix-length ] | link | intra-prefix |
grace } [ link-state-id ] ]
– display ospfv3 [ process-id ] lsdb [ originate-router advertising-router-id | self-
originate ] external [ ipv6-address prefix-length ] [ link-state-id ]
Run the commands as follow to check the OSPFv3 routing table:
– display ospfv3 [ process-id ] routing uninstalled
– display ospfv3 [ process-id ] routing [ abr-routes | asbr-routes | statistics
[ uninstalled ] | ipv6-address prefix-length | intra-routes | inter-routes | ase-routes |
nssa-routes ]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 OSPFv3 Configuration

434

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Quidway netengine40eNe40eNe80e